Category: Materials

Roof covering made of roof tile-shaped coated sheets, mounted on battens made of cold-formed steel profiles.

Metal sheets are most often used for roofing …

Styrofoam shapes play the role of the so-called. salunk traconego, and in terms of construction possibilities they resemble "Lego" bricks. Special locks allow for tight and durable joining of individual fittings without the use of glue. For laid shapes …

LECA products:
a) hollow bricks for construction walls
b) foundation wall blocks
c) blocks for partition walls
d) lintel fittings U – for use over holes to 3,3 m …

Sticking styrofoam and chipboard concaves

Ceiling concaves, fixed at the junction of the wall and ceiling, are a good finishing solution for a slab ceiling. They soften the angularity of the room and hide the cracks that have formed …

Cutting polystyrene boards

Most of the time it will turn out, that the edge plates must be cut to the desired size. Put the plate on, you want to trim, to Wall, exactly on the last glued full plate. Next …

Fastening polystyrene boards

These boards can be placed on an even ceiling surface without much effort, provided, that the substrate will be clean, dry and free from paint or wallpaper residues. Suitable …

Waterproofing insulating materials

Asphalt roofing felt and liquid bituminous materials are used for anti-moisture insulation.

Depending on the raw materials used, asphalt sheets are divided into: insulating, undercoat and for top covering. …

Steel products

The following steel products are used in construction: sections, sheet metal, pipes, bars for concrete reinforcement, rolled bars, sheet metal products and special profiles. Na rysunku przedstawiono normowe profile …

Wood

Wood is a raw material obtained from felled wood. From wood you can get: round logs, halves (amphibians), quarters, squares, bale, boards, patches, slats and poles made of trunks of teenage trees.

Najszersze zastosowanie …

Ceramic products

Ceramic products are made of clay after appropriate processing, shaping and firing at a temperature of 850-1000 ° C.
Solid brick is used to make the walls, a brick with a hole or a checkered pattern …